Liftlogy and Liftlogy SP are next-generation Japanese lifting devices combining three technologies: EMS (muscle stimulation), LED light and heat. Together, they help tone facial muscles, improve skin quality and enhance the absorption of skincare products.
PRESENTATION BY KEIKO SUYAMA
LIFTLOGY E-WORKSHOP REPLAY
In this e-workshop, our team explains how to use Liftlogy step by step and how to integrate the device into your routine to achieve the best results.
BEFORE YOU START
For safety reasons, some individuals should not use this device.
Do not use the device if:
- you have a pacemaker or an implanted electronic medical device
- you use an electronic life-support medical device
- you use an electronic medical device worn on the body
- you have an existing or suspected heart condition
- you suffer from an autoimmune disease
- you are unable to feel heat or stimulation
Consult a physician before use if:
- you have hypertension, diabetes or a blood disorder
- you have an infectious disease or fever
- you have nerve damage
- you suffer from a skin condition or dermatitis
- you are under regular medical treatment
Remove all metal accessories (watches, rings, necklaces, earrings, etc.) before using the device.
1. PREPARE YOUR SKIN
Use the device on clean skin.
- Thoroughly remove makeup.
- Apply a lotion or serum to moisten the skin.
- Prefer a watery or slightly thick texture to improve EMS conductivity.
Avoid using oils, scrubs or warming skincare products during use.
2. TURN ON THE DEVICE
Press the POWER button.
The device emits two short beeps and automatically starts in FACE mode.
3. SELECT THE MODE
Briefly press the MODE button to choose:
- FACE
- BODY
In FACE mode, the blue-green LED light turns on. In BODY mode, the red LED light activates.
4. ADJUST THE SETTINGS
You can personalize the treatment according to your sensitivity:
- EMS: 6 intensity levels
- Heat: 3 levels
If you are using the device for the first time, always start at level 1 and gradually increase over time.
5. THE FACIAL RITUAL (2 MINUTES)
The Liftlogy protocol works in 2-minute cycles, which corresponds to 1 minute per side of the face.
- Neck: hold the device in place for 10 seconds
- Under the chin / jawline: hold for 10 seconds
- Cheekbones: glide slowly toward the temples for 20 seconds
- Temples: hold for 5 seconds
- Forehead: hold at the center for 5 seconds
- Cheeks: gently glide toward the temples for 10 seconds
After one minute, move to the other side of the face. To extend the session, press the center button to start another 2-minute cycle.
RECOMMENDED USAGE TIME
- 1 session per day recommended
- 2 minutes per treatment cycle
- Maximum 10 minutes per area
- Maximum 20 minutes per day
Allow at least a 24-hour interval before treating the same area again.
CAUTION
- EMS stimulation may sometimes activate dental nerves. If you feel a sensation in your teeth, reduce the intensity.
- Do not press the device firmly against the skin.
- Stop using the device if discomfort or skin reactions occur.
- If symptoms persist, consult a physician.
Complete user guide:
Download the Liftlogy manual
