*The power adapter is not included with the European version, but you can connect the cable to a computer or to any standard USB power adapter.
To charge the mask's control modules, use the magnetic dual-pin USB charging cable and connect it to a computer or a USB power adapter.
A small guide is located in front of the two charging pins to help you attach the cable in the correct direction (see the video).
While the control modules are charging, a blue indicator light flashes. Once the light turns off, the battery is fully charged. A full charge provides an average of 27 sessions of 10 minutes each.
Before using the mask, apply a lotion or serum to clean skin. This improves electrical conductivity and helps the electrical impulses reach the facial muscles more effectively.
Insert the control modules into their corresponding slots (L for Left and R for Right), as indicated on both the mask and the modules.
Next, place the mask on your face and fasten the straps over the top of your head. The mask should fit securely to prevent it from slipping during use.
An extension strap is included in the box. There is also an adjustable chin tab to help fit the mask comfortably to your face shape.
The mask features two buttons: ON to power on and increase the intensity, and OFF to power off and decrease the intensity. Once the mask is properly positioned on your face, press and hold the ON buttons on both modules simultaneously.
A pink indicator light will turn on and a beep will sound, activating intensity level 1 for a 10-minute session on each side.
Press the buttons on both control modules simultaneously to ensure balanced and symmetrical stimulation on both sides of the face. If the buttons are not pressed at the same time, the stimulation will be uneven.
The device features 5 intensity levels. For your first use, start with the lowest intensity. To increase the intensity, press the ON button again. A second beep will sound, and intensity level 2 will be activated.
Repeat this action to move through the higher intensity levels. To reduce the intensity, press the OFF button. You can adjust the intensity independently on each side of the face according to your comfort level. Using different intensity levels on each side will not have any negative effect.
If you wish to turn off the device before the 10-minute session ends, press and hold the OFF button. At the end of the 10-minute session, a beep will sound and the stimulation will stop automatically.
To clean the mask, simply wipe it with a soft, damp cloth. Avoid using harsh cleaning products, as they may damage the mask.
A single 10-minute session per day is sufficient to help improve facial contours, refine the jawline, and sculpt the cheeks.
