Press the (+) button once to turn on the device. A green light will flash to indicate that it is powered on.
To increase the intensity, press the (+) button.
⚠️ Do not increase the intensity too quickly. Raise it gradually until you reach a comfortable, pain-free level.
To decrease the intensity, press the (-) button.
The device automatically turns off after 3 minutes. If you wish to turn it off sooner, press and hold the (-) button.
The intensity ranges from 1 to 10. For most users, levels 1 to 5 are sufficient. People with thicker muscles around the neck and shoulders may require level 10.
MODE 1 Attach the Gel Pads. Fully extend the headset arms. Hold the device with the "R" on the right side. Place the Gel Pads beneath the cheekbones. You should feel a gentle lifting sensation in your cheeks.
Turn on the device. It starts in Mode 1 by default. Gradually increase the intensity until you reach a comfortable level of stimulation. A setting between 1 and 5 is recommended.
At first, one side of your face may respond less than the other. With daily use, the muscles will gradually relax, allowing both sides to move more evenly.
MODE 2 Attach the Gel Pads. Fully extend the headset arms. Hold the device with the "R" on the right side. Position the treatment heads beneath the ears on the upper neck.
Turn on the device and switch to Neck Mode by pressing and holding the (+) button. Adjust the intensity. The neck is more sensitive to electrical stimulation, so a level between 1 and 4 is recommended.
MODE 3 Attach the Gel Pads. Hold the device with the "R" on the right side. Position the headset so the Gel Pads rest against your temples.
Turn on the device and switch to Eye Mode by pressing and holding the (+) button twice. The recommended intensity is between 1 and 3.
Warning: The skin around the eyes is particularly delicate.
MODE 1 Attach the Gel Pads. Fully extend the headset arms. Hold the device with the "R" on the right side. Position the treatment heads vertically against the sides of your face. Adjust the arm length and place the headset at the back of your head.
Turn on the device. It starts in Mode 1 by default. Gradually increase the intensity until the stimulation feels comfortable. A level between 1 and 5 is recommended. If you experience discomfort, reduce the intensity until it feels comfortable.
MODE 2 Attach the Gel Pads. Fully extend the headset arms. Hold the device with the "R" on the right side. Position the headband toward the front so that the treatment heads rest on the back of the neck.
Turn on the device and switch to Neck Mode by pressing and holding the (+) button. Adjust the intensity. This position provides a deep massage, so it is recommended to use a low intensity setting.
MODE 1 Reverse the device so that the "R" is on the left side and the "L" is on the right. Attach the Gel Pads upside down so they slightly extend beyond the treatment heads. Apply the Gel Pads so they cover the upper cheeks.
Turn on the device and remain in Cheek Mode. The recommended intensity is between 1 and 3.
MODE 1 Reverse the device so that the "R" is on the left side and the "L" is on the right. Attach the Gel Pads upside down so they slightly extend beyond the treatment heads. Fully extend the headset arms. Apply the Gel Pads to cover the sagging areas around the mouth. Adjust the arm length for a secure and comfortable fit.
Turn on the device. The recommended intensity is between 1 and 3. If you experience discomfort, reduce the intensity to a comfortable level.
The Remote Player is an accessory specifically designed for the Face Player, allowing you to extend its range of applications. Attach the Gel Pads to the ends of the cables. Connect the cables to the Face Player where the Gel Pads would normally be attached. Remove the protective films and apply the Gel Pads to the desired area of your face or body.
Press the (+) button on the Face Player to turn on the device, select the desired mode, and begin your treatment. Once powered on, electrical stimulation will begin immediately.
The Gel Pads should adhere firmly to your skin without lifting. Proper adhesion ensures effective electrical conductivity. If the Gel Pads begin to peel away from the skin, poor contact may concentrate the electrical current in one spot, which can cause discomfort or pain.
As soon as you notice that the Gel Pads are losing their adhesion, replace them with a new set. This ensures safe, comfortable, and effective use.
