*The power adapter is not included in the European version but you can plug the cable into a computer or on a lambda adapter.
To charge the mask control pods, use the dual-stem magnetic USB cable and connect it to a computer or power adapter.
There is a small stopper in front of the two charging pins to help you attach the cable in the correct direction (see video).
When the control boxes are charging, a blue light will flash. As soon as the light goes out, it means charging is complete. A full charge allows on average 27 uses of 10 minutes each.
Before using the mask, apply lotion or serum to clean skin. This allows for better conductivity of electricity and facilitates the transmission of electrical impulses to the muscles.
Place the control boxes in their respective spaces (L for left and R for right) indicated on the mask and modules.
Next, position the mask on your face and secure the straps to the top of your head. The mask should be firmly attached to prevent it from falling off during use.
An extension for the tie straps is included in the box. There is also a tab at the chin to adjust the mask to the shape of your face.
The mask has two buttons: ON to turn it on and increase the intensity; OFF to turn it off and lower the intensity. Once the mask is correctly positioned on your face, simultaneously press and hold the buttons for a long time ON of the two modules.
A pink indicator light comes on and a beep sounds, activating intensity 1 for a duration of 10 minutes on each side.
Press both buttons on the control boxes simultaneously to ensure symmetrical and even stimulation on both sides of the face. If the buttons are not pressed at the same time, the stimulation will be asymmetrical.
The device has 5 intensity levels. For first use, start with the lowest intensity. To increase the intensity, press the button a second time ON. A second beep will sound and intensity 2 will be activated.
Repeat this action to advance to higher levels. If you want to reduce the intensity, press the button OFF. You can adjust the intensity on each side of the face according to your sensitivity. The change in intensity between the two sides will not have a negative impact on your face.
If you want to turn off the device before the end of 10 minutes, long press the button OFF. Once 10 minutes have elapsed, a beep will sound and stimulation will automatically stop.
To clean the mask, simply use a soft, damp towel. Avoid products that are too aggressive which could damage the mask.
Using 10 minutes a day is enough to improve the oval of the face, refine and sculpt the cheeks.
